Item No. NF-LM1915
Beam angle 4-60º
Light source 19*15W 4in1
Protection level IP20
Perfect Color Mixing
The 19pcs 4in1 RGBW 15W leds are the perfect choice for this projector, they guarantee perfect color mixing at any beam angle.
Perfect Color Consistency
Very bright beam compared to the size of the unit.Perfect color consistency over the complete dimmer range.
16 Bit Resolution
High speed pan/tilt movements with 16bit resolution assure dynamic show programming.
Calibrated Color Macros
Calibrated color macros (Lee filters standard) for easy and fast show programming
Two different 14ch DMX channel modes for maximum flexibility.
Automatic X/Y re-positioning.High speed 4° to 60° zoom for maximum flexibility.
Neutrik 3pin & 5pin
Neutrik PowerCON® in/outputs: easy daisy chaining of several units up to 16A.
Neutrik 3pin & 5pin in/outputs for maximum flexibility in a professional environment
Easy firmware updates keep your machine up-to-date at all times (optional firmware updater needed)
Power supply AC90-240V 50-60HZ
Total power 450W
Light source 19 four-in-one 15W high-brightness lamp beads
Beam angle 4-60º
Strobe 1-25 times / second with multiple strobe effects
Dimming 0-100% linear dimming
Channel Built-in 6 channel modes: 21 CH / 23 CH / 35 CH / 78 CH / 92 CH / 97 CH / 99CH
Control DMX512, self-propelled, voice control, Artnet (optional)
Horizontal scanning 540 degrees + 16bit fine adjustment
Vertical scanning 250 degrees + 16bit fine adjustment
Display Chinese and English
Protection levelg IP20
Do these lights ship from CHINA?
Yes. They are.
Do they come with a manual?
Why did the Dmx controller light change? I can't read the display. everything is in Chinese. the first 16 lights I bought are different than the one I just got today
You can change it to English. Push the menu button and select the 3rd option from the top. Then on the top line go till you see EN and hit enter. It should be in English then.
Does this fixture come with mounting hardware? I'd like to install these lights upside down on a truss
Yes, they have the Omega clamp but you need to have the hook to mount them on the truss.
What’s in the box?
1x DJ lighting equipment light, 2x Omega clamp, 1x user manual, 1x power cable, 1x DMX cable
Event bartender and looking for impressive lighting for the ceilings above my bar setups. do these require a DMX board? how would you suggest setup?
They don’t require it, but it is how they were designed to work.