You Might Also Like
- Description
- Specs
- Faq
- Reviews
Item No. FY-2WFY-3W
Red Laser R635-500mW R635-700mW
Green Laser G520-500mW G520-900mW
Blue Laser B445-1W B445-1400mW
Scanning system 25K 25K
FY moving head lasers lights high-precision stepping motor scanning system
The moving head laser light extreme torque of FY-04 and the resulting high speed of up to 180rpm make this device the perfect equipment for spectacular performances and effects.
The ILDA control signal can be completely used for laser control, and the FY-04 movable yoke itself is controlled by the standard DMX512 protocol. DMX-only operation is also possible.



Easy to install and carry
For safety reasons and to hit the beam target correctly, the FY-04 laser moving head has an absolute positioning accuracy of 0.022° per axis.
The FY-04 shell is made of sturdy anodized aluminum, which is very durable. Plastic parts are neither used for the yoke nor for the base.



Rated Voltage
AC100~240V 50/60Hz
Rated Power
1000W
Scanner
30K high speed module scanner (Can be upgraded to 60K),Scan angle:±30°;Input signal:±5V;Linearity distortion2%)
Motor
2Pcs
Pan/Tilt
X axis 540°Y axis 270°
Modulation
analog
Beam diameter and Divergence
5mm;2mrad
Control Modes
Music four mode with black out)/Automatic/Master-Slave/DMX512(25CH)
Demonstration effect
Built-in 144 pattern
DMX effect
Single pattern modes,and with the function of unique blanking,strobing, rotating, movement, billowing, zoom,drawing,speed and color etc.
Why the moving headlight is not responded to the DMX controller?
DMX LED should be on. If not, check DMX connectors, and cables to see if link properly.
Why the moving headlight is not responding to the sound?
Make sure the fixture does receive a DMX signal.
Can you make the laser light moving head only shine in one color? Like just a white roaming light? That’s all I need thanks
Yes, you can do this.
Can I mount them on top of my speakers?
It comes with a bracket to be mounted to the bar stand. The only way to mount to a speaker is a bracket being drilled to the top of speaker.