Red LaserR600mw/638nm R1000mw/638nm R1200mw/638nm R1500mw/638nm
Green LaserG800mw/520nm G1000mw/520nm G1400mw/520nm G2000mw/525nm
Blue LaserB1600nw/450nm B2000nw/450nm B2500nw/450nm B2500nw/450nm
Scanning system 30KPPS 30KPPS 30KPPS 30KPPS
Newfeel NF660 laser projection light
The Newfeel NF660 laser projection light is a full-color RGB laser light ilda laser projector, designed for clients who want an economically friendly laser show system, that still has the power to produce beautiful aerial beam effects, as well as resolution laser graphics, logos, and text.
Our NF660 Series lasers lights are perfect for DJs, nightclubs, concerts, and entertainment venues, where you need an impactful and easy-to-use show laser system. Newfeel NF660 is suitable for venues/crowds of up to 3,000 people incapacity.
3D Dance Laser Light Show
The new NF660 Series color stage laser lights Halloween projector is mainly used in bar laser light projects and 3D laser dance performances.
This 3W color laser light can be used as a 3D laser dance performance only with the PRO version of the German Fire Phoenix laser control software and a laser performance curtain.
The newly designed 360-degree drop pendant allows this laser light to be installed or hoisted anywhere and at any angle.
Integrated Color Laser Design
This is a color laser show system that is suitable for bars, weddings, and 3D laser light projector dances. It is a high-performance color laser light with all imported lasers. It is suitable for bars and rental customers who require high performance and stability. The site area is less than 300 square meters, and the floor height is less than 8 meters. Due to the selection of all-diode lasers and integrated color laser design, its brightness and effect can even surpass that of conventional 5W domestic laser light lamps.
NF660 Series laser projectors
Newfeel NF660 Series led laser light projectors are incredibly easy to set up and use. And can easily be controlled via DMX / ArtNET.
The optical composite light color mixing effect is more delicate and stable
NewFeel Laser's self-developed software has been pre-installed inside the color laser light, which allows you to use longer DMX signal lines for control without interference or graphic jitter.
The advantage of the new F660 3W color laser show projector is that the optical part adopts a fully sealed design
Even in the harsh bar environment, the e-liquid will not cause damage to any device.
Due to a major technological breakthrough, we canceled the original dust filter design, greatly improving the air intake for heat dissipation, and at the same time, it will not cause poor heat dissipation due to mesh blockage.
The optical platform adopts a floating design, and the optical color mixing effect is more delicate and stable. Normal transportation and use will not have any impact on the combined light, even if it is transported by vibration or rolling, it will hardly affect the optical system. You can safely hang the device, side-mounted or upside down.
Suitable for bars with high performance and stability requirements.
Indoor large and medium-sized venues such as medium-sized
Theaters and hotel banquet halls
The area is less than 300 square meters, and the floor height is less than 8 meters
Laser Wedding Show
3D Laser Dance Show
Power supply AC90-240V,50-60Hz±10%
Rated power max 200W
Laser power RGB1-6W
Laser modulated signal analog or TTL modulation
Beam diameter at the aperture max 6mm
Beam divergence max 1.3mrad
Laser wavelength red 638±5nm, green 520±5nm, blue 450±5nm
Scanning system 30KPPS high speed scanning
Control mode international standard ILDA control /DMX512 signal control /self-walk/voice control/master-slave
Control interface international ILDA DB25 interface, international DXM512 ,can connect with American pangolin laser software and tiger, pearl, MA controller,etc.
Safety function one beam protection, no signal to close the light,etc.
Suitable places show，dacing hall, club, Bar and other enterntainment venues
Working environment indoor (-30~40 degrees)
Packing carton case
What material is the NF660 laser light showing product case?
It is a metal case with a metal bracket.
Would Newfeel NF660 lasers artwork for an outdoor party?
Yes, it would, but it is not waterproof.
If I am unhappy with the NF660 RGB laser, What can I do about it?
Hi, dear. Any questions, please do not worry, please send the Email to us First by your order ID and tell us what is problem, we will do our service for you.
Can I use the Dmx controller to make NF660 laser animation display 3d patterns?
On the device itself or on the DMX controller.
How to set the NF660 nightclub lasers to slave mode?
The mode button on the back.
Does the NF660 laser show system have an SD card slot to insert ilda files? Does the device also come with an SD card to change the mode on the computer?
You can choose different items when purchasing: normal configuration/with SD card/with FB4.