What are the functions of the laser lights software?
Blogs

What are the functions of the laser lights software?

by Newfeel Ho on Jan 20, 2023

L1. Quick text editing function

General laser lights software has very outstanding fast text editing functions. This function enables the laser lights software to create static and scrolling text, and the software is equipped with a variety of scrolling text special effect preset templates that can be directly clicked and applied. When using the software, the operator can quickly input the text of any country supported by the computer, and the effect of scrolling text can be previewed when the mouse passes over the effect box.
Prism Magic Laser Show

2. Quickly create graphics function

laser lights software can use points, lines, circles, angles and other elements to create graphic patterns, and the created graphic patterns can be used for projection, and can also be used to make beams of different shapes such as fans, cones, and waves. And you can use laser lights software to add effects and change colors on this basis, save the completed program and drag it to the preview window to one of the program grids.

3. Conversion function

The conversion function of the laser lights software allows users to easily and quickly convert pictures in BMP, JPEG, and GIF formats into graphic images that can be used by lasers. Moreover, the conversion process is almost importing and transferring out, and the speed advantage far exceeds that of other similar products. In addition, the laser lights software can also modify and optimize the converted pictures, so that it can meet the needs of users for high-quality pictures to a greater extent.
Prism Magic Laser Show

Reasons for the popularity of laser lights software

1. Quick text editing function

Usually, professional laser lights software has obvious and easy-to-distinguish editing interface and playback channel. Moreover, each channel has a separate interface for control, and there will be no change due to the serial number of the control box. If a certain control box has a power failure or other accidents, the editing interface of the software will not be closed automatically, and the operator only needs to check or replace the faulty control box individually.

2. Quickly create graphics function

laser lights software can use points, lines, circles, angles and other elements to create graphic patterns, and the created graphic patterns can be used for projection, and can also be used to make beams of different shapes such as fans, cones, and waves. And you can use laser lights software to add effects and change colors on this basis, save the completed program and drag it to the preview window to one of the program grids.

3. Conversion function

The conversion function of the laser lights software allows users to easily and quickly convert pictures in BMP, JPEG, and GIF formats into graphic images that can be used by lasers. Moreover, the conversion process is almost importing and transferring out, and the speed advantage far exceeds that of other similar products. In addition, the laser lights software can also modify and optimize the converted pictures, so that it can meet the needs of users for high-quality pictures to a greater extent.

Reasons for the popularity of laser lights software

1. The editing interface and playback channel are obvious

Usually, professional laser lights software has obvious and easy-to-distinguish editing interface and playback channel. Moreover, each channel has a separate interface for control, and there will be no change due to the serial number of the control box. If a certain control box has a power failure or other accidents, the editing interface of the software will not be closed automatically, and the operator only needs to check or replace the faulty control box individually.
Prism Magic Laser Show

2. Easy to install and run smoothly

The laser lights software is very convenient to install, and its popular application effectively solves the problems of difficult installation of traditional stage software and difficulty in finding drivers. If users want to use the software on different computers, they only need to copy the corresponding laser lights software folder. In addition, because professional laser lights software generally has the characteristics of smooth operation, it will not appear to be stuck or run slowly due to memory occupation.

3. The front and back work are independent of each other

The laser lights software is very intelligent in handling the independent issues of the front and back work. It mainly adopts the method of separating the background creation and editing from the front real-time playback function, so as to ensure that any editing, update and creation work of the operator can only be seen in the background. When everything is ready, just click the "Play Now" button, and the laser will automatically output to the foreground, which is conducive to creating a better picture effect.

How to choose stage laser lights? Precautions for purchasing stage laser lights.

1. When purchasing stage laser lights, pay attention to the power and spot diameter

The beam of stage laser lights can cause fatal damage to human eyes, and the greater the power, the more dangerous it is. If the stationary green laser beam with a spot diameter less than 2mm and a power greater than 100mW hits the human skin directly, there will be a burning sensation within a few seconds. When a green laser beam with the same spot and a power greater than 300mW is directly irradiated on the clothes, the clothes may be burned through within one minute. Therefore, do not look directly at the stationary laser beam!
During the laser show, the laser beam is scattered by high-speed galvanometer scanning. Although the power of the laser is relatively high, the laser power density per unit area after scanning is already very low, and it usually does not cause irreversible damage to human eyes. . However, if the laser beam suddenly stops moving during the normal scanning process due to a fault in the circuit or the scanning mirror, and this laser beam happens to hit your eye, then you are out of luck. If it is light, your eyesight will decrease obviously, if it is serious, you will lose your sight immediately!
Laser shows are beautiful, but dangerous! In order to solve this problem, developed countries such as Europe and the United States have developed a set of "laser scanning out of control protection" technology. After the laser lights is equipped with this technology, when the laser beam stops scanning unexpectedly, the laser will be automatically turned off immediately. Therefore, in order to protect the safety of you and your customers, it is recommended that you pay attention to whether the product has the "laser scanning failsafe" function when purchasing a laser demonstration product, and verify this function.

2. Look at the classification of laser lights

At present, there are two types of laser lights on the market from the classification of scanning devices. One is the simple beam scanning laser lights. This type of laser lights uses a low-speed stepping motor to scan, and its effect is only some simple and repetitive beam effects. The other type is the galvanometer scanning laser lights, usually this type of laser lights can put text and animation. The galvanometer scanning laser lights can be divided into a low-speed text animation laser lights of about 10Kpps and a high-speed text animation laser lights of greater than 30Kpps in the ILDA standard.

3. Look at the actual effect of voice control

Now many laser lights have "voice control" function, this "voice control" is actually a very simple volume trigger laser playback function, the effect is simple and monotonous. And "laser music synchronous synthesis playback" is to synchronously synthesize the laser effect data and the relevant rhythm data of the music and then play them together. In this way, with the cooperation of the background music, the laser is played synchronously with the rhythm of the music in an orderly manner. The effect is simple " Voice control" effect is incomparable.

4. Look at the artistic effect of text animation

At present, many so-called text animation laser lights on the market have no "broken pen" effect, and the artistic sense of text animation is very poor. The so-called "broken pen" means that when placing characters, there should be no laser connection between the strokes of the same character, or between two characters. Generally, low-end laser lights have no "broken pen" effect, and the text or animation they project has a great degree of distortion.

5. See if it has "multiple laser pattern stunts"

If the laser lights or performance system has the function of "multi-pattern special effects", then the effects that it can deliver will be more abundant. It can be simply said that such a single-head laser lights can deliver a combination equivalent to two ordinary single-head laser lights. Effect.
Prism Magic Laser Show

6. Look at the advantages and disadvantages of the performance of the "galvanometer"

The galvanometer is a key component that directly affects the quality of pattern delivery. Usually, a good galvanometer can deliver more text with the same fidelity, or the text with the same amount of text has less distortion. The galvanometer that can put high-quality text can also put high-quality laser effect patterns with more effects.

7. Check whether the "DMX512" is intelligent or not.

Many laser lights on the market that claim to be "DMX512 controlled" basically have no programming function, just simple pattern calls, and the effect of such laser lights is usually relatively monotonous. The "multifunctional DMX512 intelligent programming" provides powerful programming and pattern effect editing methods. laser lights with such functions can directly edit laser scene effects and programs through the DMX512 console, and at the same time can combine laser effect scenes with traditional stage The scene effects of lighting are organically combined. In short, you can mix such laser lights with computer lights controlled by DMX 512 to achieve the perfect combination of laser effects and lighting effects.